Stainless steel tap with Aqua Aurora water vitaliser for water filter

The best of both worlds! The stainless steel tap with Aqua Aurora vitaliser for water filters – this allows you to vitalise your filtered water as you draw it, so you can then enjoy delicious, filtered and vitalised water! The perfect addition to your Berkey, BOROUX or Pure Filters water filter!

This stainless steel tap with Aqua Aurora vitaliser is high quality and beautifully finished. It completes your water filter system. It fits all stainless steel Berkey water filters (not including the Berkey Light) and even on the stainless steel BOROUX water filter systems and the Pure Filters water filtration systems.
 

Rejuvenate with the stainless steel tap fitted with the Aqua Aurora revitaliser

The water that comes out of our taps these days is heavily influenced by its unnatural environment. Water is chemically purified and then transported to the consumer via extensive pipework systems. During this process, the water loses its original vitality and absorbs all manner of harmful information. For instance, we know that water is exposed to radiation from sources such as high-voltage power lines, mobile phone masts and generators. But we also know that, even after chemical purification, these stresses remain present on an energetic level. Vitalisers can erase this harmful information and replace it with the frequencies of shell lime. In this way, the water regains its original vitality and its negative frequencies are erased. A Berkey, BOROUX or Pure Filters water filter purifies the water, but does not vitalise it. With this combination, the process is therefore complete!

The stainless steel tap fitted with the Aqua Aurora vitaliser therefore ensures that the water regains its natural vibration. The vitaliser operates at the frequency of shell limestone. This eliminates unnatural frequencies caused by radiation and the energetic burdens of other toxic substances. People, plants and animals respond to this immediately and become more vital themselves. The result is fewer health problems in people and less disease and mortality in plants and animals.

The way an Aqua Aurora Vitaliser works is simple. The vitaliser consists of a stainless steel tube through which the water flows. The double-walled water-carrying tube is made of 316 stainless steel, which is certified for use in the food industry. The vitaliser is filled with material in which the desired frequency (shell limestone) is stored. It transfers this frequency to the passing water. The vitaliser erases harmful frequencies and replaces them with the frequency of the material (shell limestone) within the vitaliser. In the case of the Aqua Aurora vitalisers, unlike other vitalisers, the system primarily utilises frequencies based on shell limestone (which is very close to the original primordial information of our Earth – the vibration of Mother Earth, as it were). This is what makes these vitalisers unique compared to other vitalisers.
 

Features of the stainless steel tap with Aqua Aurora vitaliser:

• Made from high-quality stainless steel
• A beautifully polished finish
• The whole thing protrudes approximately 17 cm from the water filter
• Wide opening of the tap spout
• Simple on/off handle position
• Fill a 250 ml glass in a matter of seconds
• Includes all the necessary components, such as a nut, cover plate, silicone sealing rings and (if required) sealing tape. Everything you need for a straightforward installation.
• It’s been fully assembled and tested in advance. So all you have to do is put it together

An addition to your Berkey, BOROUX or Pure Filters water filter

So simply order it from your stainless steel supplier Berkey water filter, BOROUX water filter or Pure Filters water filter. The Berkey stainless steel tap It’s already a popular addition to a water filter, but this stainless steel tap with the Aqua Aurora vitaliser now makes the process absolutely complete!
 

Assembly

Installation is very straightforward. The tap is fully assembled and tested in advance. It comes as a set comprising a stainless steel tap with an Aqua Aurora vitaliser, 1 nut tube, 1 stainless steel cover plate, 1 black rubber sealing ring and 1 white silicone sealing ring.
Insert the tap through the hole in the lower chamber of the water filter. Ensure that the black rubber sealing ring (already fitted to the thread) is on the outside. Slide the white silicone sealing ring onto the thread from the inside, followed by the other stainless steel cover plate. See the illustration below.
Next, screw the nut onto the tap’s thread (on the inside of the water filter) and tighten it firmly (as far as it will go). Then hold the nut tube in place on the inside and turn the tap on the outside. You’ll notice that it becomes even tighter. Keep doing this until you can’t turn it any further. If the tap isn’t sitting straight, do the following: release the nut tube on the inside and turn only the tap on the outside until it is straight. It will then turn as a single unit. If you’ve accidentally turned it too far, DO NOT turn it back. Doing so will simply loosen it again. So if you’ve gone too far, simply turn the whole unit through again until it’s properly seated.
You are now ready to use the water filter and can draw water from it.