BOROUX shower filter

A better shower starts with better water. The BOROUX shower filter reduces exposure to any chemicals, helping to relieve dryness and irritation, while supporting your skin's natural moisture balance and your hair's natural shine.
 

The BOROUX shower filter

Take a shower with this shower filter and experience it for yourself. The water you shower with can contain as many contaminants as unfiltered drinking water. Chemicals in your shower water can cause dry hair and skin. Small upgrades can already really improve your quality of life. Experience the remarkable difference this high-quality shower filter can make in your daily life. Experience softer hair and softer skin with every shower, designed for everyday use.

Inside, a mixture of high-quality copper-zinc alloy and calcium sulphite works to neutralise chemicals before they reach your skin and hair. The result is cleaner, softer water that feels noticeably softer from the first shower.

No complicated installation required. This filter is suitable for the standard 1/2″ shower connection (inlet) and naturally also works with many shower hoses and shower heads (outlet). This shower filter can also be combined with the universal shower head.
The BOROUX shower filter is installed within minutes with the sealing tape provided. Simply attach, tighten and enjoy cleaner water immediately.

The shower filter should be replaced every 3 to 6 months.
 

Key features of this shower filter:

• Beautifully shaped finish
• High-quality filter material: uses a high-purity copper-zinc alloy and calcium sulphite to effectively reduce chemicals and make the water feel more pleasant to the touch
• Reduces chemicals that remove natural oils from the skin, leaving skin and hair feeling softer
• Approximate dimensions: 6.5 cm (diameter) by 11.5 cm (height)
• Easy to install without tools (the product also comes with quite a bit of sealing tape, if needed)
• Filter life: 3 to 6 months (filter life and performance vary depending on household conditions)
• Made of food-safe plastic
• Suitable for standard 1/2″ shower connection
• Possibly combined with the universal shower head

Installation instructions:

1. Clean the connection of the tap or shower arm and hose or shower head (i.e. where you want to connect the shower filter)
2. Apply 3 layers of sealing tape to the connection and to the lower connection of the shower filter (clockwise)
3. Attach the shower filter to the tap or shower arm and hose or shower head and tighten clockwise (CAUTION! DO NOT overtighten).
4. Turn on the tap to the desired temperature
5. Let the water run for a few minutes without standing under it yourself
6. You're done and you can enjoy the BOROUX shower filter

Remark:
- If there is leakage at the connections, try tightening the shower filter. If this does not help, loosen the shower filter and check or replace the sealing tape.

Please refer to our library, which includes manuals and answers to frequently asked questions.